Redding Full Length (straight-wall) Steel 3-Die Set - 40-82
The Redding Full Length (straight-wall) Steel 3-Die Set - 40-82 is a set of conventional dies for reloading handgun ammunition, or straight walled rifle calibres.
Prices for out of stock products may not be current.
Backordered products pricing may not be final,
please refer to our backorder policy for more information.
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The expander die flares the case mouth to accept the bullet.
The seating die can also apply crimp, a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
Click here for more details on the functionality of Redding dies.
These conventional dies have standard threads (7/8" x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading.
Case lube is optional on these carbide dies. In general, we recommend using an easy-to-apply, spray-on case lubricant like Dillon's DCL, with lanolin (DLN-13733).
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you'll feel the significant reduction in force required to operate the press!
This die set can be used to load the following calibres: 40-82 Win
This calibre is part of Redding's Series D category. Dies in Series A represent the most popular calibres Redding produces and are thus offered at the lowest prices. Dies in Series B through D are less and less popular, and correspondingly more expensive to produce.
Custom dies in most calibres are also available on request.
|Manufacturer Part Number||80482|
|Shipping Weight (Kg)||1|
|Die Price Category||Series D|
|Seat Die Adjustment||Adjustment screw|
|Seat Die Type||Seat & Roll Crimp|
|Expand Die Type||Expand Only|
|Sizing Die Material||Steel|
|Size Die Type||Full-Length Sizing|
|Screw Thread||7/8" x 14 tpi|
|Reloading Application||Turret, Single Stage|
|Die Family||Redding Full Length (straight-wall) Steel 3-Die Set|
|Die Function||Expand Only, Full Length Size Only, Seat & Crimp|
|Number of Dies in Set||3.00|
- Suitable for the following calibre(s): 40-82 Win
- Die material: Titanium Carbide
- Micrometer Adjusted Seating
- Screw thread: 7/8x14tpi
- Steel sizing and decapping
- Controlled expansion of the case mouth.
- Seating depth set by Adjustment screw.
- Built-in crimp.
- Steel, Full Length Sizing Die
- Expander Die
- Seating Die (with crimp)
- Spare Decapping Pin
- Allen Key
- Printed Instructions
- Redding Decal (Sticker)