Redding G-Rx TiC Sizing Die - 40 S&W
The Redding G-Rx Titanium Carbide Sizing Die - 40 S&W is a conventional base sizing die for .40 S&W autoloading pistols that exhibit a bulge near the base.
The case is pushed through the die completely, removing the bulge near the base.
Titanium Carbide has the highest hardness of any readily available carbide, and has a slippery non-galling surface that is ideal for resizing of cartridge cases without requiring lubricant.
While not required, we still recommend using an easy-to-apply case lubricant like Dillon DCL, with lanolin (part number DLN-13733). This saves wear and tear on the cartridge cases and your reloading equipment; you'll feel the significant reduction in force required to operate the press!
This set includes a titanium carbide base sizing die and E-Z feed pushrod.
This die can be used to load .40 S&W.
|Manufacturer Part Number||96150|
|Shipping Weight (Kg)||1|
|Sizing Die Material||Titanium Carbide|
|Size Die Expander||None|
|Size Die Type||Base Sizing|
|Screw Thread||7/8" x 14 tpi|
|Reloading Application||Progressive, Turret, Single Stage|
|Die Family||Redding G-Rx Sizing Die|
|Die Function||Full Length Size Only, Base Sizing|
|Number of Dies in Set||1.00|
- Suitable for the following calibre(s): .40 S&W
- Die material: Titanium Carbide (TiC)
- Screw thread: 7/8x14tpi
Base Sizing Die:
- Titanium Carbide (TiC) sizing ring.
Green Plastic Storage Box, containing:
- Titanium Carbide (TiC) Base Sizing Die
- E-Z feed push rod
- Allen Key
- Printed Instructions
- Redding Decal (Sticker)