Redding Pro-Series Titanium Carbide 3-Die Set - 44Rev
The Redding Pro-Series Titanium Carbide 3-Die Set - 44Rev is a set of dies for reloading handgun ammunition on progressive reloading systems
Prices for out of stock products may not be current.
Backordered products pricing may not be final,
please refer to our backorder policy for more information.
This die set allows you to re-size the full length of the cartridge case, while also removing the spent primer.
The pro-series seating die can also apply crimp (if necessary) and features a generous radius of the case mouth for easy case entry.
The separate crimp die, with a similar generous radius of the die-mouth, applies a profile crimp (i.e. roll crimp on rimmed calibres) or taper crimp if the cartridge headspaces on the case mouth (i.e. most pistol calibres).
Click here for more details on the functionality of Redding dies.
These pro-series dies have standard threads (7/8" x 14tpi), so can be used on most reloading machines. They are primarily intended for progressive reloading, where the case mouth is flared at the powder dispensing station, so this set does not include an expander die.
Case lube is optional on these carbide dies. In general, we recommend using an easy-to-apply, spray-on case lubricant like Dillon's DCL, with lanolin (DLN-13733).
Case lube saves wear and tear on the cartridge cases and your reloading equipment; you'll feel the significant reduction in force required to operate the press!
This die set can be used to load the following calibres: .44 Special and .44 Magnum
In the Titanium Carbide family of dies, the 9mm and 500 S&W are more expensive than other calibres.
|Manufacturer Part Number||89286|
|Shipping Weight (Kg)||1|
|Crimp Die Adjustment||Die Body|
|Crimp Die Type||Profile Crimp|
|Seat Die Adjustment||Adjustment screw|
|Seat Die Type||Seat Only|
|Sizing Die Material||Titanium Carbide|
|Size Die Expander||None|
|Size Die Type||Single Sizing Ring|
|Screw Thread||7/8" x 14 tpi|
|Die Family||Redding Pro-Series Titanium Carbide 3-Die Set|
|Die Function||Crimp Only, Full Length Size Only, Seat Only|
|Number of Dies in Set||3.00|
- Suitable for the following calibre(s): .44 Special and .44 Magnum
- Die material: Titanium Carbide
- Micrometer Adjusted Seating
- Screw thread: 7/8x14tpi
- Titanium Carbide (TiC) sizing ring.
- Lubeless resizing.
- Controlled Profile crimp.
- Seating depth set by Adjustment screw.
- TiC Sizing Die
- Seating Die (with crimp)
- Profile Crimp Die
- Spare Decapping Pin
- Allen Key
- Printed Instructions
- Redding Decal (Sticker)